Partitioning Hardware-Software Functionality between Architecture Resource

Simulation Analysis:

The user can vary the parameter on any of the blocks in the model.

1. Vary the Speed_Mhz of the uP, DSP or ASIC and notice the change in the Resource usage plot.
2. Modify the active and standby power for the DSP, ASIC, uP or Memory Resource to see the change in the power plot
3. Modify the Destination_Processor parameter in the behavior blocks and see the change in the Resource_Usage plot.

All the Hierarchical levels are shown in associated windows:

View of the VisualSim model of a Video Frame Traffic Source

View of the VisualSim model of the RTOS

View of the VisualSim model of the Memory

View of the VisualSim model of the uP

View of the VisualSim model of the Stabilize behavior block in the Video Frame flow

Mirabilis Design © Copyright 2008, All Rights Reserved.