Blogs

Webinar- 14th November 2024

October 29, 2024

Optimize Systems and Semiconductor Architecture for Deep Learning Algorithms Using System-Level Modeling Date: November 14th, 2024 Session 1: 11:30 AM India / 3:00 PM Japan or Korea / 2:00 PM China Sign up: https://bit.ly/4eZqnjP Session 2: 10:00 AM USA PDT / 1:00 PM USA EDT Register: https://bit.ly/3YFM82o Overview In a world where artificial intelligence and […]

Mirabilis Design at ELIV

October 9, 2024

Mirabilis Design at ELIV – Driving innovation in automotive through modelling and simulations. Mirabilis Design will be exhibiting at next week’s ELIV – International VDI Congress. At the show we will be demonstrating VisualSim Architect, the leading platform for modelling and simulation of complex automotive systems. With rapid advancements in electrification, autonomous vehicles and other […]

ARM corelink, Arteris NoC, UCIe, Bunch-of-wires, CXL and PCIe

October 2, 2024

ARM CoreLink, Arteris NoC, UCIe, Bunch-of-Wires, CXL, and PCIe – Designing the Interconnect is Not for the Weak-Hearted! In today’s high-stakes world of System-on-Chip (SoC) design, figuring out the best interconnect architecture can feel like navigating a maze. With so many choices—ARM CoreLink CMN700, Arteris FlexNoC, UCIe, Bunch-of-Wires, CXL, and PCIe—it’s easy to feel overwhelmed. […]

Webinar: ARM corelink, Arteris NoC, UCIe, Bunch-of-wires, CXL and PCIe

September 27, 2024

ARM corelink, Arteris NoC, UCIe, Bunch-of-wires, CXL and PCIe – Designing the interconnect is not for the weak-hearted! Timings: Session 1: 11:30 AM India / 3:00 PM Japan or Korea / 2:00 PM China Register here: https://bit.ly/4elxVwY Session 2: 10:00 AM PDT / 1:00 PM EDT Register Here: https://bit.ly/4epEQ8v With so many Network-on-Chip (NoC) solutions […]

Digital Avionics Systems Conference (DASC)- Mirabilis Design

September 26, 2024

Mirabilis Design will be exhibiting at the upcoming Digital Avionics Systems Conference (DASC), showcasing VisualSim Architect. Innovation in the aerospace industry has been driven by a leap forward in complex avionics systems. From safety and efficiency gain to defence considerations, the benefits have propelled the industry forward. But these innovations do not come without their […]

Early analysis of UAV using Modeling and Simulation

September 5, 2024

Early analysis of Unmanned Aerial Vehicle System (UAV) using Modeling and Simulation Abstract Architecture exploration, power and performance analysis plays a very important role in the Unmanned Aerial Vehicle system design flow. About 70% of the project success rate relies completely on the architecture that designers select during first 20% of the project schedule and […]

Digital Twin | AI-drives Visual Picture of the Power Flow

August 30, 2024

AI-drives Visual Picture of the Power Flow at Architectural Stage of Design Design community has fully embraced Computer Aided Design(CAD) and Electronics Design Automation (EDA) tools for system design, however system modeling is one of the area, where some of the product design experts are not fully aware of high value (beneficial /shift-left) tools in […]

ARM vs RISC-V Cores | System level Comparison-Latency, Power

August 16, 2024

Methodology for System-level Comparison of ARM vs RISC-V Cores for Latency and Power Consumption System-level analysis is the only methodology to compare the performance and power consumption of two processor architectures. Unfortunately, processor models to perform the comparison are not easily available. This article describes a performance and power comparison methodology using system-level IP between […]

Hardware Software Partitioning- Simulations and Discussions

August 16, 2024

Hardware Software Partitioning – Simulations & Discussions Hardware/software partitioning is the concept of dividing an application’s computations into a part that executes sequential instructions on a microprocessor (the “software”) and a part that runs parallel circuits on some IC fabric like an ASIC or FPGA (the “hardware”), such as to achieve design goals set for […]

Functional Safety for Braking System through ISO 26262

August 8, 2024

Functional Safety for Braking System through ISO 26262, Operating System Security and DO 254 Implementation of safety measures is on the rise in today’s automotive world in order to minimize the hazards in case of system malfunction. Today’s automobiles run various safety critical applications like ABS, electronic power steering, air bag sensors, radar sensing, and […]

Reducing Power Consumption | Early System-Level Modeling

August 8, 2024

Measuring and Reducing Power Consumption Using Early System-Level Power Modeling Power evaluation in the early stages of the product design has been performed mostly using analytical methods such as spreadsheets. These spreadsheets typically contain the power for different tasks or devices and the sheet adds the worst case or the average of the power. These […]

Switch Design for Optimal Service Quality

July 26, 2024

Switch Design for Optimal Service Quality A large number of current-generation switches and routers operate in a multi-protocol, non-blocking, packet segmentation, packet reassembly, parallel execution environment. The system must support quality of service (QOS) levels that take into account video frame rate constraints, switch-to-switch throttling control, packet priorities, error checking/correction, and retransmission of overflow packets […]

« Previous 1 2 3 4 5 … 18 Next »